节能评估报告是我国经济发展的一项长期的战略任务。根据“监管”的中国能源保护法人民共和国法律“，”固定资产投资项目的可行性研究报告，应当包括对能源的合理利用特殊的示范。固定资产投资项目的设计和施工，应当符合标准合理利用能源和节能设计标准“，达不到合理利用能源和节能设计项目标准，审批机关不得批准建设。之后，项目建成后，达不到合理利用能源和节能设计规范的标准，验收缺乏of1111banned过时和建设新技术落后，能耗高，严重浪费能源产业项目“高耗能产品，设备的淘汰制度“等。根据有关规定，建设项目和节能审查，应包括项目总能量和能源结构是合理的;该项目符合国家，地方和行业节能设计规范和标准。项目指标均达到同行业国内或国际先进水平，并没有明令禁止或淘汰的落后工艺，设备，项目使用能源，节能新技术，新工艺，新产品等。项目建设单位应在审查和批准委托的设计单位在工程设计中的节能措施，按照。施工图设计审查机制，以应对项目施工图审查。规划行政主管部门处理，施工图审查的节能监督管理工作。项目建设单位不得以任何理由要求设计单位，施工单位修改审查合格的节能设计文件，降低节能标准。项目建设单位应包括特殊的节能验收验收记录。建设单位应当将审查合格的设计文件和建设节能建筑标准建设，确保施工质量。监理单位应当按照法律，法规和建筑节能标准，节能设计文件，工程建设和节能工程施工监理合同监督合同，以达到该项目的节能设计要求，应要求建设单位应当予以纠正。在建设和工程质量监督机构负责行政部门应当加强对建筑节能的监督检查，在完成建设项目的施工单位应当审查提交竣工验收报告是否包括节能验收的特殊记录。
节能评估报告有关行业和建筑节能的关键
工业是能源消耗大户，占全国能源总消费量的约70％。钢铁，石化，建材，有色行业能源消费工业能源消费总量的60％以上的帐户，节能的重点行业。投资项目的分析是符合产业结构调整的要求，通过产业结构升级，促进经济增长由主要依靠工业驱动器，体积膨胀驱动，转向促进三次产业的协调和优化升级的驱动器，节约能源，促进发展的基础上。合理规划产业和地区布局，调整产业结构，严格的业务开始一个新的高能耗项目的能耗标准，项目审批和记录的强制性门槛，遏制高耗能行业过快增长。搬迁耗能企业严格的准入管理。加快淘汰落后生产能力，工艺，技术和设备，促进企业重组，提高产业集中度和规模效益，以鼓励清洁能源的使用效率，逐步减少原煤直接使用，提高发展比例煤炭用于发电，煤的气化和液化，提高转换效率，并引导企业合理用电。在节能建筑，发展节能型建筑，促进在能源设计标准-saving50％，直属中央政府的直辖市和一些地区在实施严格执行新的住宅和公共建筑节能65％的标准。推广节能Resonstruct现有建筑物，推广新型墙体
Energy conservation is our country economic development of a long-term strategic task. According to the" law of the people's Republic of China energy conservation law" regulation," fixed assets investment project feasibility study report, should include the special demonstration of rational use of energy. Fixed asset investment project design and construction, shall comply with the standards for rational use of energy and energy conservation design standard" not up to the standards for rational use of energy and for energy conservation design projects, the examination and approval authority shall not be approved for construction. After the completion of the project, not up to the standards for rational use of energy and energy-saving design specifications, the lack of acceptance of1111banned the construction of new backward technology, high energy consumption, serious waste of energy industry project" on outdated and highly energy-consuming products, the equipment of the elimination system" etc.. According to relevant regulations, construction projects and review of energy conservation, should include project with total energy and energy structure is reasonable; the project is in line with national, local and industry energy-saving design specifications and standards. Project indicators are reached the same industry domestic or international advanced level, with and without explicitly prohibit or eliminated the backward technology, equipment, project uses energy-saving new technology, new technology, new products etc.. Project construction unit should be in accordance with the examination and approval by the energy-saving measures, commissioned by the design unit in engineering design. Construction design review mechanism to deal with project construction drawing review. The planning administrative department to deal with construction drawing review of energy conservation supervision and management work. Project construction unit shall not be any reason to require the design units, construction units to modify the review qualified energy-saving design file, reduce the energy saving standard. Project construction unit should include the special energy saving acceptance acceptance records. Construction units should be qualified to review the design documents and construction of energy-efficient construction standards for construction, ensure construction quality. Supervision units should be in accordance with the laws, regulations and the building energy saving standards, energy-efficient design documents, contract of engineering construction and supervision of energy saving engineering construction supervision contract, to reach the energy-saving design requirements of the project shall require the construction units shall be corrected. The administrative department in charge of construction and engineering quality supervision institution shall strengthen the supervision and inspection of building energy saving, in the completion of the construction project for the construction unit should review presented the completion acceptance report whether to include energy-saving acceptance special records.
Key related to the industry and building energy saving
Industry is a big energy consumption, accounting for about 70% of the total national energy consumption. The iron and steel, petrochemical, building materials, non-ferrous industries energy consumption accounts for over 60% of total industrial energy consumption, energy-saving key industries. Analysis of investment project is in line with the requirement of industrial structural adjustment, through the upgrading of the industrial structure, promote economic growth by relying mainly on industrial drive and volume expansion drive, steering coordination of the three industries to promote and optimize upgrade drive, based on the energy conservation to promote development. Reasonable planning of industry and area layout, adjust industrial structure, strict on business to start a new high energy consumption projects, the energy consumption standards for project approval and record the mandatory threshold, curb the excessive growth of high energy-consuming industries. On the relocation of energy consumption enterprises strict admittance management. Accelerate the elimination of backward production capacity, process, technology and equipment, promote enterprise restructuring, improve the industry concentration degree and scale benefits, to encourage the efficient use of clean energy, gradually reduce the direct use of raw coal, increase the proportion of development of coal used for power generation, coal gasification and liquefaction, improve conversion efficiency, and guide enterprises to reasonable electricity. In the construction of energy-efficient, to develop energy-efficient type of construction, promoting new residential and public buildings in the strict implementation of energy-saving50% of the design standards, municipality directly under the central government and some areas in the implementation of energy-saving 65% of the standard. To promote energy saving Resonstruct of the existing building, promotion of new wall
